32
Using Your Car Kit
Call Waiting
When you are on a call, an audible beep signals a 2nd call.
Note:
If the ANSWER button is not pressed, the incoming
call is automatically rejected and sent to voicemail (if set
up on the phone).
Sending DTMF Tones
You can send DTMF tones from the phone keypad, or by
using the
Enter
command:
Action
Press and release the ANSWER button to place the 1st
call on hold and answer the incoming call.
Each time you press and release the ANSWER button,
you toggle between active calls.
Action
1
Press the TALK button.
2
When prompted, say “
Enter <digits>
” to send
numbers as DTMF tones.
BTHandsfree_multi.book Page 32 Tuesday, July 12, 2005 8:46 AM
To Next Page
Loading...
