39
If You Need Help
You cannot
pair new
phones with
the car kit.
•
The phone must support Bluetooth
®
Handsfree Profile 0.96 or 1.0.
•
The system supports a maximum
of 4 phones at once. Make sure
this limit is not exceeded.
•
Remove all previous pairings
using the
Remove All
command.
The system should be reset.
•
Delete the pairing information on
the phone and ensure that the
phone is removed from any other
systems with which it is paired.
No SR or HF
audio.
•
Check speaker connection.
•
Check the connection to the
electronic module.
SR does not
respond, or
in-vehicle
audio is not
heard on the
remote phone.
•
Check microphone connection.
•
Check the connection to the
electronic module.
System does
not respond.
UIM buttons
not lit.
•
Check UIM connection.
•
Check the connection to the
electronic module.
Symptom Solution(s)
BTHandsfree_multi.book Page 39 Tuesday, July 12, 2005 8:46 AM
To Next Page
Loading...
