Motorola IT.6XC Series User Manual

20 Phonebook
4.5 Enter a pause
If your IT.6XC is connected to a switchboard, you may need to enter a pause in a stored
number. This gives the switchboard time to get an outside line. A pause is normally stored
after the switchboard access code (e.g. 9)
1. When storing a number, press and hold # until the display shows P. You can then
continue storing the phone number.
4.6 View an entry
In standby:
1. Press Menu . Phonebook is displayed.
2. Press OK. View is highlighted, press OK .
3. The rst number in the phonebook is displayed. Scroll u or d to the entry you want.
Or
To search alphabetically, press the key with the rst letter of the name, e.g. if the name
begins with N, press 6 twice.
The display shows the rst entry beginning with N. If required, press u or d to scroll
to the exact entry.
4. Press View to view the number.
During a call:
1. Press Pb to open the phonebook menu.
2. Enter the rst letter of the name you want then scroll u or d if necessary to the exact
name. Press View to display the number.
3. Press Back to cancel the phonebook display.
4. Press e again to end the call.
4.7 Edit an entry
1. Press Menu . Phonebook is displayed.
2. Press OK , scroll d to Edit .
3. Press OK, the rst number in the phonebook is displayed. Scroll u or d to the entry
you want or search alphabetically and press OK .
4. Edit the name and press OK to conrm. Press Clear to delete characters.
5. Edit the number. Press Save to conrm. Press Clear to delete digits.
6. Press e to return to standby.

Motorola IT.6XC Series Specifications

General

Brand	Motorola
Model	IT.6XC Series
Category	Cordless Telephone
Language	English