Motorola IT.6XC Series User Manual

33Advanced settings
8.10 Register a handset
At the base:
1. Press and hold the p button on the base for 5 seconds. You have 120 seconds in
which to register a handset.
On the handset:
1. If the handset is not register to a base press OK and go to step 4.
2. If the handset is already registered to a base, press Menu , scroll d to Advanced Set and
press OK .
3. Scroll d to Register and press OK .
4. When the display shows Press locator Key for 5 sec. , press OK.
5. Enter the base PIN and press OK .
When the handset registers with the base, it is assigned a handset number.
8.11 De-register a handset
Use one handset to delete another. You cannot delete the handset that you are using.
1. Press Menu , scroll d to Advanced Set and press OK .
2. Scroll d to Unregister and press OK .
3. Enter the 4 digit master PIN and press OK .
Display shows the rst registered handset number.
4. Scroll u or d to select the handset you want to delete and press OK .
Unregistered is displayed on the handset screen.
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.
8.12 Reset
This will reset your IT.6XC to its default settings.
1. Press Menu , scroll d to Advanced Set and press OK .
2. Scroll d to Reset . Press OK .
3. Conrm? is displayed. Press OK .
NOTE
Entries stored in the phonebook are retained. After reset, depending on your country, the
welcome mode setting may be shown on the handset display.

Motorola IT.6XC Series Specifications

General

Brand	Motorola
Model	IT.6XC Series
Category	Cordless Telephone
Language	English