32 Advanced settings
8.6 Recall time
This setting is useful to access certain network and PABX/switchboard services.
The default IT.6XC recall time is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
1. Press
OK
, scroll d to
Advanced Set
and press
OK
.
2. Scroll d to
Recall time
. Press
OK
.
3. Press u or d to select the setting you want:
Short
,
Medium
,
Long
.
4. Press
OK
to conrm.
5. Press e to return to standby.
NOTE
The functionality of your IT.6XC cannot be guaranteed on all PABX.
8.7 Dial mode
The default IT.6XC dialling mode is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
1. Press
Menu
, scroll d to
Advanced Set
and press
OK
.
2. Scroll d to
Dial Mode
. Press
OK
.
3. Press u or d to select
Tone
or
Pulse
.
4. Press
OK
to conrm.
5. Press e to return to standby.
8.7.1 Temporarily switch from Pulse to Tone dialling
1. Press l before dialling the number will change the dial mode from Pulse to Tone for
the duration of the call.
8.8 Switch auto clock on / o
If you have subscribed to Caller ID Service, the date and time will be set on all your
handsets whenever a call is received. This feature can be set to On or O.
1. Press
Menu
, scroll d to
Advanced Set
and press
OK
.
2. Scroll d to
Auto clock
and press
OK
.
3. Scroll d to
On
or
O
then press
OK
to conrm.
4. Press e to return to standby
8.9 Registration
Up to 4 handsets can be registered to one base station. Additional handsets must be
registered to the base before you can use them.
• The Master PIN is required before you can register or unregister handsets. The default
PIN is 0000.
To Next Page
Loading...
Need help?
General
