Motorola IT.6XC Series - Set a Call Block Number; Change the Call Block PIN; Auto Prefix

31Advanced settings
8.4.2 Set a call block number
1. Press Menu , scroll d to Advanced Set and press OK .
2. Scroll d to Blacklist . Press OK .
3. Scroll d to Blacklist . Press OK .
4. Enter the master PIN (default setting 0000) and press OK .
5. If necessary, scroll u or d to the next available slot.
6. Press OK and enter the number you want to block. Press Save to conrm.
7. Press e to return to standby.
8.4.3 Change the Call block PIN
1. Press Menu , scroll d to Advanced Set and press OK .
2. Scroll d to Blacklist . Press OK .
3. Scroll d to Change PIN . Press OK .
4. Enter the old PIN and press OK .
5. Using the keypad enter the new PIN and press OK .
6. Re-type the new PIN and press Save .
7. Press e to return to standby.
8.5 Auto prex
You can set the IT.6XC to detect a dialling number and replace it with another number.
The number to be detected can be up to 10 digits long. It can be replaced with a number
up to 10 digits.
1. Press Menu , scroll d to Advanced Set and press OK .
2. Scroll d to Auto prex . Press OK .
3. Detect digit is displayed.
4. Enter the number you want to be detected and press Save .
5. Prex is displayed.
6. Enter the number you want it replaced with and press Save .
7. Press e to return to standby.