MAEPF-
MAEPF-
MAEPF-
MAEPF-
MAEPF-
MAEPF-
MAEPF-
MAEPF-
14
14 Radio Operation
with Features (cont.)
• Multi-Selectable PL/DPL/CSQ Mode
A numeric-display screen and a dispatch-
display screen,(see Basic Radio Operation
section) apply to Multi-Selectable
PL/DPL/CSQ Mode. For the description of
Multi-Selectable PL/DPL/CSQ Mode, the
dispatch-display screens are used.
Turn the radio on and select a channel, for
example channel 3. The screen will display the
channel number and the squelch code
assigned to that channel (CH 3 3). The
squelch code is for both transmit and receive.
Press side-button 2; the display will show the
channel number, indicate the type of squelch,
and display the DPL code or PL frequency if
applicable. For example (CH 3 = #131). The #
sign signifies DPL squelch. Use the arrow keys
to scroll through and select any of the other
channel codes to be moved to the channel
that you are on. For example, while scrolling,
the screen would display: CH 3 = C4, CH 3 =
C5, CH 3 = C6, etc. Stop on the desired
channel code (for example CH 3 = C5) and
press side button 2 again to move channel 5’s
squelch code to channel 3. Channel 5’s code
will remain on channel 3 even if the radio is
turned off and back on. To return to original
channel programming, press the key
followed by the key within two seconds.
This function is enabled from the factory, but
can be disabled by Radio Service Software.
Note: Multi-Selectable channel programming
can be cleared (reset) on the selected channel
by pressing the HOME key while in the Multi-
Selectable PL/DPL/CSQ Mode.
• Program Edit Mode
Turn the radio on and select a channel. The
LCD shows the channel number and the
squelch code assignment. To enter the
program edit mode, press either one of the
arrow keys on the keypad. The SQL PWR
softkey menu screen will be displayed. When
in this menu, pressing the key changes the
display to QUIT?, which lasts for two seconds.
The screen changes to display YES NO.
Press softkey button to return to radio
operation. Press softkey button and return
to the SQL PWR softkey menu.
Note: Programming/editing will be only for
the channel selected.
HOME
HOME
0
1
3
DEF
To Next Page
Loading...
