Motorola HT-1000

© 1996, 1995, 1994, 1993, 1992 by Motorola, Inc.
Radio Products Group
8000 W. Sunrise Blvd., Ft. Lauderdale, FL 33322
Printed in U.S.A. 7/96. All Rights Reserved.
HT 1000™/JT1000™/VISAR™
Conventional Portable Radios
Radio Service Software
User’s Guide
Software Part Number: RVN-4098G
68-81073C55-F

Motorola HT-1000 Specifications

General

Channels	16
Operating Temperature	-30°C to +60°C
IP Rating	IP54
Frequency Range	136-174 MHz, 403-470 MHz
Battery Life	8-10 hours (with standard battery)
Battery Type	NiMH / Li-ion
Power Output	5 Watts (VHF), 4 Watts (UHF)

Summary

Equipment Checklist

Assembling The Hardware

Steps to Connect the Hardware

Details the step-by-step process for connecting the hardware components for radio programming.

Installing the RSS on your Hard Disk

RSS Hard Disk Installation & Start-Up Procedure

Details the procedure for installing the RSS onto the computer's hard drive and initiating the program.

Setup Computer Configuration

Service Menu Functions

Servicing the Radio Using the RSS

Service Menu

Transmit Alignment Menu

Reference Frequency Alignment

Transmit Power Alignment

Transmit Deviation Balance (Compensation) Alignment

Transmit Deviation Limit Alignment

Transmit Deviation Limit Alignment: Reference Softpot

Transmit VCO Crossover Alignment

Receiver Alignment Menu

Front-End Filter Alignment (VHF and UHF)

Rated Audio Alignment (Carrier Squelch)

Squelch Alignment (2530 kHz)

Squelch Alignment (12.5 kHz)

Receiver VCO Crossover Alignment

Signalling Alignment Menu

Test Mode Alignment

Controller Board Initialization

GetSaveProgram Menu Functions

Read Data From Radio (Requires RIB)

Clone (Copy) Data to Another Radio

Save Workspace Data to Archive File

Program Radio Codeplug (Requires RIB)

ChangeView Menu Functions

Radio Configuration Menu

Radio System Configuration

VISAR Configuration Options (Models with Display only)

Side Button Configuration (HT 1000 B and JT1000 Models)

Alert Tone Configuration

Mode Switch Position Assignment (HTJT1000 only)

Signalling Options

Quik-Call II Options

MDC Configuration

STAR Configuration

ATIS Configuration

Single Tone Signalling

DTMF Phone List (JT1000 and VISAR Models only)

Scan List

Scan Configuration

Channel Configuration

Channel Options

Print Service Menu

Print Transmit Service Menu

Print Receive Service Menu

Print Codeplug Configuration Menu

Computer-to-Radio Communication Error Codes

MDC Signalling

STAR Signalling

ATIS Signalling

Scan Signalling

Permanent Monitor

Tx Inhibit on Busy (Smart PTT)