Motorola HT-1000 - STAR Configuration

99
Signalling Options From the MAIN MENU, press F4, F3 and then F7 to access this screen.
This menu provides access to signalling option configuration screens:
Quik-Call II, MDC/STAR/ATIS, Single Tone, and DTMF.
Note: The MDC/STAR/ATIS option (F3) will not be visible if a
JT1000 codeplug is loaded into the work space.
Function Key Descriptions
F2 - QUIK-CALL II
(Quik-Call II Options)
Brings up a screen from which you can configure Quik-Call II options.
F3 - MDC/GS/AT OPT
(MDC/STAR/ATIS Options)
This function will NOT be visible for JT1000 model radios. Brings up a
screen from which you can configure MDC/STAR/ATIS options.
F4 - SINGLETONE
(Singletone Configuration)
This function will be visible only for VISAR, HT 1000 “B”, and JT1000
models. Brings up a screen from which you can configure Single Tone
options.
F5 - DTMF LIST
(DTMF Phone List)
This function will be visible only for models with DTMF keypad. Brings up
a screen from which you can configure DTMF options.
DCG
MOTOROLA Radio Service Software Select a function key, F1-F10.
HT/JT1000/VISAR Model :
Serial:
CHANGE:RADIO:SIG OPT
Signalling Options Menu
-----------------------
F1 - HELP
F2 - Quik-Call II Options
F3 - MDC/STAR/ATIS Options
F4 - Singletone Configuration
F5 - DTMF Phone List
F6 -
F7 -
F8 -
F9 -
F10 - EXIT
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP QUIK MDC/GS/ SINGLE- DTMF EXIT
CALL II AT Opt TONE LIST