88
Side Button
Configuration
(HT 1000 “B” and
JT1000 Models)
From the MAIN MENU, press F4 and then F3 twice to access this
screen.
Note: If an Advantage™ Board is installed in the radio and Side
Button 2 is functionally used by the Advantage Board, that button
MUST be set to “Blank” to prevent dual usage.
Function Key Descriptions
F5 - PRINT Prints the current system configuration.
F9 - DEFAULT Resets the fields on this screen to their default values.
Field Definitions
Sidebutton Functions Use the UP/DOWN arrow keys to select the functions for this button.
Not all functions are available on all models.
Note: The RSS will not allow side button functions to be duplicated
on more than one button, or allow you to duplicate a function that is
assigned to another control (for example, Scan on a side button
and Channel-Slaved Auto-scan in the same radio). If Scan is
already assigned to another control, Scan-related selections will
not be displayed on this screen.
The possible functions that can be assigned to Sidebuttons 1, 2 and 3
are:
DCC
MOTOROLA Radio Service Software Use <: keys to adjust value.
HT/JT1000/VISAR Model : H01SDC9AA3BN Use <Enter> key to go to next feature.
Serial:
CHANGE:RADIO:SIDE BUTTON
Side Button Configuration
-------------------------
Sidebutton 1 function.................................Select Button
Sidebutton 2 function.........................................Blank
Sidebutton 3 function.......................................Monitor
Monitor Long Press Period (sec)...................................5
Permanent Monitor...........................................Enabled
Permanent Monitor Definition...........................Open Squelch
External Mandown Switch.....................................Enabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT DEFAULT EXIT
Blank No function, no key chirp is sounded.
Monitor Radio will unsquelch when this button is pressed,
allowing you to listen to activity on the channel.
RAT An MDC Repeater Access Code will be transmitted when
this button is pressed. Available only with HT 1000 models.
To Next Page
Loading...
