73
Radio System
Configuration
From the MAIN MENU, press F4, F3 and then F2 to access this screen.
Note: The VISAR OPTIONS (F2) function will be visible only if a
VISAR model number is read. If an HT 1000 or JT1000 model
number is read, the VISAR OPTIONS function will not be
displayed.
The JT1000 OPTIONS (F3) function will be visible only if a JT1000
model is read. If an HT 1000 or VISAR model number is read, the
JT1000 OPTIONS function will not be displayed.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is selected, press the UP/DOWN arrow keys to select
the desired choice or value.
Function Key Descriptions
F2 - VISAR OPTIONS This function will be displayed only for VISAR models. Brings up a screen
where you can modify additional system configuration options for
VISAR radios.
F3 - JT1000 OPTIONS
(Not shown)
This function will be displayed only for JT1000 models. Brings up a screen
where you can modify additional system configuration options for
JT1000 radios.
F5 - PRINT Prints the system configuration for the current codeplug.
F9 - DEFAULT Resets the fields on this screen to their default values.
DCB
MOTOROLA Radio Service Software Use <: keys to scroll value.
HT/JT1000/VISAR Model : H05UCH6AA7DN Use <Enter> to go to next feature.
Serial:
CHANGE:RADIO:SYS CONFIG
System Configuration
--------------------
Maximum Channel................16 Clear Chan Definition....Matched PL
Timeout Timer (sec)............60 Transmit LED................Enabled
Auto Reset Timer (sec).........10 Flashing LED.....Chan-Busy/Low-Batt
CS Sleep Period (ms)..........105 Quick Key Override..........Enabled
PL Sleep Period (ms)...........60 Tx Inhibit Monitor Func.....Enabled
AGC......................Disabled Battery Saver PL Lockout...Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP VISAR PRINT DEFAULT EXIT
OPTIONS
To Next Page
Loading...
