72
F6 - SWITCH CONFIG
(Mode Switch Configuration)
This function will NOT be visible for VISAR models. This screen will vary
depending on the product (HT 1000 or JT1000). Brings up a screen from
which you can configure the radio’s mode switch position assignment.
F7 - SIGNAL MENU
(Signalling Menu)
Brings up a screen from which you can configure the radio’s signalling
options (Quik-Call II, MDC/STAR/ATIS, Single Tone, and DTMF Phone
List).
F8 - SCAN LIST
(Scan List Configuration)
Brings up a screen from which you can configure the radio’s scan lists.
To Next Page
Loading...
