119
ATIS Configuration From the MAIN MENU, press F4, F3, F7 and then F3 to access this
screen.
This screen cannot be accessed for JT1000 model radios. Brings up a screen
from which you can configure ATIS signalling options.
Function Key Descriptions
F5 - PRINT Prints the current system configuration.
F9 - DEFAULT Resets the fields on this screen to their default values.
Field Definitions
Signalling Type Use the UP/DOWN arrow keys to select the signalling type. The
signalling type may be set to one of the following: MDC1200, STAR or
ATIS. Once the signalling type is set, the screen will reflect the applicable
options.
PTT ID Transmission Use the UP/DOWN arrow keys to enable/disable transmission of the
ATIS PTT-ID code.
The default is Enabled.
PTT ID Enter the desired value directly or use the UP/DOWN arrow keys to
make your selection for the ATIS Unit ID. This ID will be transmitted
along with every radio transmission. The digits of the ID are assigned
as follows:
DCGC
MOTOROLA Radio Service Software Use <: keys to adjust value.
HT/JT1000/VISAR Model : Use <Enter> key to go to next feature.
Serial:
CHANGE:RADIO:SIG:ATIS CONFIG
ATIS Configuration
------------------
Signalling Type...............ATIS PTT-ID Pretime (ms)................20
PTT ID Transmission...........Enabled PTT ID Bit Sync.....................4
PTT ID...................102006015996
PTT ID Sidetone...............Enabled Auto-Timed Mute Duration (ms).....550
DOS Criteria............1200_and_1800
Kani Group Call Encode.......Disabled DOS Coast Time (ms)...............100
Select Call LED...............Enabled
Call Alert LED................Enabled ATIS Initiator ID.............G00-I01
Paging Initiation............Disabled ATIS Destination ID...........G00-I00
Paging Cancel................Disabled ATIS User Code......................0
Select Call..................Disabled ATIS Status.........................0
Group Unmute.................Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT DEFAULT EXIT
Digits 1 to 3 Frequency code VHF = 101 UHF = 102
Digits 4 to 6 Manufacturer code: MOTOROLA = 006
Digits 7 to 12 Unit ID (Numeric digits only)
To Next Page
Loading...
