140
Channel
Configuration
From the MAIN MENU, press F4 twice to access this screen.
CHANNEL CONFIGURATION screen (for JT1000 models only)
The figures below show the CHANNEL CONFIGURATION screen
when different fields are enabled or disabled.
CHANNEL CONFIGURATION screen (for HT 1000 and VISAR models
only)
DD
MOTOROLA Radio Service Software Use <: keys to scroll value.
HT/JT1000/VISAR Model :H01KDH9PA3AN Use <Enter> to go to next feature.
Serial:
CHANGE:CHANNEL
Channel Configuration
---------------------
Channel..... 1 Programmed.......Yes
Rx Frequency (MHz)..........136.02500 Receive Squelch...................TPL
Tx Frequency (MHz)..........136.02500
TPL Tone................85.4 Hz YA
Talkaround...................Disabled
Rx Only Channel..............Disabled Transmit PL.......................TPL
Tx Inhibit On Busy Chan......Disabled TPL Tone................85.4 Hz YA
Power Level......................High
PTT ID.......................Disabled
Keypad Programming............Enabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHAN PREVIOUS NEXT PRINT DEFAULT EXIT
OPTIONS CHANNEL CHANNEL
MOTOROLA Radio Service Software Use <: keys to scroll value.
HT/JT1000/VISAR Model :H01SDC9AA3AN Use <Enter> to go to next feature.
Serial:
CHANGE:CHANNEL
Channel Configuration
---------------------
Channel..... 1 Programmed.......Yes
Rx Frequency (MHz)..........450.02500 Receive Squelch...................TPL
Tx Frequency (MHz)..........450.02500
TPL Tone................67.0 Hz XZ
Talkaround...................Disabled
Rx Only Channel..............Disabled Transmit PL.......................TPL
Tx Inhibit On Busy Chan......Disabled TPL Tone................67.0 Hz XZ
Stat-Alert/ATIS Sel-Call.....Disabled Power Level.......................Low
PTT ID.......................Disabled Repeater Access..............Disabled
MDC/STAR/ATIS Decode.........Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHAN PREVIOUS NEXT PRINT DEFAULT EXIT
OPTIONS CHANNEL CHANNEL
To Next Page
Loading...
