141
CHANNEL CONFIGURATION screen (for JT1000 models only, with Rx
Only Channel field enabled)
CHANNEL CONFIGURATION screen (for (HT 1000 and VISAR models
only, with Rx Only Channel field enabled)
This screen allows you to configure channels. It will vary based on the
radio model of the codeplug currently loaded into the workspace.
Function Key Descriptions
F2 - CHAN OPTIONS Brings up a screen from which you can configure additional channel
options.
F3 - PREVIOUS CHANNEL Accesses the previous channel.
F4 - NEXT CHANNEL Accesses the next channel.
F5 - PRINT Prints the current system configuration.
F9 - DEFAULT Resets the fields on this screen to their default values.
MOTOROLA Radio Service Software Use <: keys to scroll value.
HT/JT1000/VISAR Model :H01KDH9PA3AN Use <Enter> to go to next feature.
Serial:
CHANGE:CHANNEL
Channel Configuration
---------------------
Channel..... 1 Programmed.......Yes
Rx Frequency (MHz)..........136.07500 Receive Squelch...................TPL
TPL Tone................85.4 Hz YA
Rx Only Channel.............. Enabled
Keypad Programming............Enabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHAN PREVIOUS NEXT PRINT DEFAULT EXIT
OPTIONS CHANNEL CHANNEL
MOTOROLA Radio Service Software Use <: keys to enable/disable feature.
HT/JT1000/VISAR Model : Use <Enter> to go to next feature.
Serial:
CHANGE:CHANNEL
Channel Configuration
---------------------
Channel......1 Programmed.......Yes
Rx Frequency (MHz)..........851.01250 Receive Squelch...................TPL
TPL Tone...............127.3 Hz 3A
Rx Only Channel...............Enabled
Stat-Alert/ATIS Sel-Call.....Disabled
MDC/STAR/ATIS Decode.........Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHAN PREVIOUS NEXT PRINT DEFAULT EXIT
OPTIONS CHANNEL CHANNEL
To Next Page
Loading...
