EasyManua.ls Logo

Motorola HT-1000 - Print Transmit Service Menu

Motorola HT-1000
205 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
160
Print Transmit
Service Menu
At the MAIN MENU, press F5 and then F2 twice to bring up the
TRUNKING PRINT MENU.
The PRINT function is used to produce permanent records of codeplug
configurations. A printer is required and should be connected to your
computer according to the instructions in the user’s manual that came
with your computer. Graphics capability is NOT required.
Each print-out contains radio model and serial number information,
software version numbers, Radio Service Software version numbers,
and the date and time of the print-out. You must use the GET/SAVE
functions to first read or get a codeplug for printing radio
configuration data.
Note: When printing, misalignment of page breaks may result if
the printer is not set up properly. For best results, configure the
printer as an IBM ProPrinter or an Epson FX/MX having factory
default settings. The default number of lines per page is 66.
Function Key Descriptions
F2 - PRINT REF Prints out Reference Frequency Alignment information.
F3 - PRINT POWER Prints out Transmit Power Alignment information.
F4 - PRINT BAL Prints out Deviation Balance (Compensation) Alignment information.
F5 - PRINT LIMIT Prints out Deviation Limit Alignment information.
F6 - PRINT LIMIT REF Prints out Deviation Limit Alignment: Reference Softpot information.
F7 - PRINT XOVER Prints out Transmit VCO Crossover Alignment information.
F9 - PRINT ALL Prints out all the above service information modules.
EBB
MOTOROLA Radio Service Software Select a function key, F1-F10.
HT/JT1000/VISAR Model :
Serial:
PRT MAIN:SERVICE:TRANSMIT
Print Transmit Service Menu
---------------------------
F1 - HELP
F2 - Reference Frequency Alignment
F3 - Transmit Power Alignment
F4 - Transmit Deviation Balance (Compensation) Alignment
F5 - Transmit Deviation Limit Alignment
F6 - Transmit Deviation Limit Alignment: Reference Softpot
F7 - Transmit VCO Crossover Alignment
F8 -
F9 - Print All the Above
F10 - EXIT
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT PRINT PRINT PRINT PRINT PRINT PRINT EXIT
REF POWER BAL LIMIT LIMIT REF XOVER ALL

Table of Contents

Other manuals for Motorola HT-1000

Related product manuals