96
Mode Switch
Position
Assignment
(HT/JT1000 only)
From the MAIN MENU, press F4, F3 and then F6 again to access this
screen.
The three-position toggle switch on top of HT/JT1000 radios (also
known as the A-B-C Toggle switch) can have two functions assigned to
each of its positions. This screen allows you to select the desired
combination of functions.
Note: If an Advantage™ Board is installed in the radio and the Mode
Switch (ABC Switch) is functionally used by the Advantage Board,
that switch must be set to “Blank” to prevent dual usage.
Function Key Descriptions
F5 - PRINT Prints the current system configuration.
F9 - DEFAULT Resets the fields on this screen to their default values.
Field Definitions
Radio Mode Switch Select a mode by pressing Enter and/or Tab to navigate between and
within the fields. Functions for positions A through C change
automatically to reflect the selected mode. The table on page 98 shows
the available modes and their associated functions.
The default is Squelch Defeat.
In the table at the bottom of the screen, the columns marked Position
A, B and C, correspond to the physical positions of the switch. The
rows marked Function 1 and 2 correspond to the functions assigned to
those positions. As you navigate through the different function
combinations at the top of the screen (using Enter, Tab, or arrow keys)
you will notice the assigned functions changing.
DCF
MOTOROLA Radio Service Software Use arrow key to select switch mode.
HT/JT1000/VISAR Model : H01SDC9AA3AN
Serial:
CHANGE:RADIO:MODE SWITCH
Radio Mode Switch
-----------------
Scan/Scan Program 1 Squelch Defeat Scan/Ch.Opt Talkaround
Scan/Scan Program 2 PAC•RT Ch.Opt Talkaround
Scan/Talkaround Hi & Low Pwr Blank
Scan/Squelch Defeat Hi & Low Pwr/Scan Unsupported Switch
Scan/PAC•RT Talkaround/PL
Talkaround Scan
Function Position A Position B Position C
1
2 Channel Option Sq Carrier squelch Carrier squelch
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP PRINT EXIT
To Next Page
Loading...
