8 Getting Started (cont.)
MAEPF-
MAEPF-
MAEPF-
MAEPF-
MAEPF-
MAEPF-
MAEPF-
MAEPF-
8
Status Annunciators
The status annunciators indicate the status of the following radio functions:
• Battery Status ( ) – Indicates the state of the radio’s battery. Flashes
when the battery is low.
• Coded Squelch ( ) – Indicates the type of receive squelch that is in
effect for the active conventional channel; ON = CARRIER SQUELCH;
OFF = CODED SQUELCH.
• Call Received ( ) – Flashes when a Quik-Call II page is received.
• Scan ( ) – Indicates when the radio is scanning; ON = SCANNING;
OFF = NOT SCANNING.
• Priority Scan ( ) – The presence of a dot along with the scan annunciator
indicates the scanning of a priority mode; FLASHING DOT = PRIORITY
• Programming Mode ( ) – A flashing annunciator box Indicates that the
radio is in the programming mode; FLASHING = IN PROGRAMMING MODE;
OFF = NOT IN PROGRAMMING MODE.
• Keypad Lock ( ) – Disables the keypad, orange top button (DTMF), and
Side Button 2 (Multiple Select PL). The annunciator does not flash.
• Direct ( ) – Indicates whether you are talking directly to another radio
(talkaround), or through a repeater; ON = DIRECT; OFF = REPEATER.
LCD and Status Annunciators
To Next Page
Loading...
