Registering handset to the base:
IMPORTANT:
When you purchase your phone, all handsets are already registered to your
base, so you do not need to register them.Handset registration is only
necessary when you buy extra handsets or if a handset has become faulty.
You can register additional handsets to have up to five handsets per base unit,
with each handset‘s number (1 to 5) shown on its display. (Note: each handset
can only be registered to one base.)
Registering the handset
17 Phone settings
Press and hold on the base station for more than five seconds, to
put the base station into registration mode. It will stay in registration
mode for about 1 minute, so the following handset sequence must be
completed within this time.
The handset will automatically be allocated the next available handset
number. This handset number is shown in the handset display in standby mode.
If the handset registration is unsuccessful, the will still flash.
Press and to select REGISTRATION.
Press OK to display PIN?------.
Enter the 4-digit system PIN (default 0000).
Press OK to confirm, and the display will show SEARCHING. If the handset
registration is successful, you will hear a confirmation tone and the will
stop flashing.
To Next Page
Loading...
Need help?
General
