You can redial any of the 5 last numbers called. If you have stored a name
in phonebook to go with the number, the name will be displayed instead.
The most recent last number will display at the top of the redial list.
NOTE:
If the redial list entry shows a name, press # to view the number of
this entry.
Press to browse the redial list.
Press to dial to the selected redial number.
NOTE:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
8. Private phonebook
Each handset can store up to 20 private phonebook entries with names and
numbers. Each phonebook entry can have a maximum of 20 digits for
the phone number and 12 characters for the name. You can also select
ringtones only play when you receive a call if you subscribe to caller
display and the incoming number matches the stored number.)
Phonebook entries are stored alphabetically by name.
13 Private phonebook
Redialing the last number
Redialing a number from the redial list
In idle mode, press to access the redial list.
Finding a handset
NOTE:
If there are no numbers in the redial list, the display shows EMPTY .
You can locate the handset by pressing the find key . All the handsets
registered to the base will produce the paging tone and show PAGING
on the display for 60 seconds.
You can stop the paging by pressing on any handset or on the
base again.
To Next Page
Loading...
Need help?
General
