Using Your Digital Audio Baby Monitor 17
ENGLISH
2. Press to reset the timer to
00-00
, then press - or + to adjust the timer.
Each key press represents an interval of 30 minutes, up to an interval of 24
hours.
3. Press or to save and start the adjusted timer.
The screen will display
SAVED
before returning to idle screen.
The sleep timer button remains lighted when the timer is running.
NOTE
If no key is pressed within 10 seconds after adjusting the timer in step 2, the
adjusted timer will be stored automatically, but the timer will not start.
To start the timer, press and then press or .
When the time limit is reached, the sleep timer button will flash and the
parent unit will emit an alarm for 30 seconds. Press any key on the parent unit to
stop the alarm and reset the timer to
00-00
.
3.5 Lullaby
You can play lullaby to drown out disturbances so that your child can slumber
peaceful and easily.
3.5.1 Select lullaby on the baby unit
1. Press on the baby unit to enter lullaby menu.
2. Press repeatedly to select your preferred lullaby.
3.5.2 Start or end lullaby playback from the baby unit
1. Press on the baby unit to enter lullaby menu.
2. Press or
to start playing the last selected lullaby.
3. Press or
to end playback.
3.5.3 Start or end lullaby playback from the parent unit
1. To start lullaby playback, press when the parent unit is not in use.
2. To end lullaby playback, press .
3.6 Select display language for the parent unit
Choose from 3 languages.
1. Press on the parent unit when is not in use.
2. Press
- or + to scroll to
LANGUAGE
and then press .