6
need to use the included coax cable between the MoCA
adapter’s DEVICE coax and the device you disconnected.
2. Next, connect the included Ethernet cable between the
MoCA adapter’s Ethernet jack and the LAN Ethernet jack
of the router or modem/router.
3. Plug the power adapter into a live outlet, and make sure
that the On/Off button is On.
Installing a MoCA Adapter for a smart TV
or other device
Go to the device you’re connecting to the router and connect
as shown below.
Figure 3. MoCA connection for a device
To Next Page
Loading...
Need help?
General