Fix a problem
If you're having problems with a Bluetooth device, try these troubleshooting steps.
Tap & pay with NFC
Only some versions of this phone, sold in certain countries, support this feature.
Use NFC (near-field communication) to pay quickly and securely at checkout registers by
touching your phone to an electronic reader.
Set up Tap & pay
1. Make sure you have:
• Set up a payment app on your phone. Install one from Play Store if needed.
• Turned on NFC.
2. Go to Settings > Apps & notifications > Default apps > Tap & pay.
3. Touch Payment default.
4. Touch an app to make it your default payment app.
Note: This feature manages payment apps. Tap & pay doesn't apply to Android Beam and
won't include certain apps, such as money transfer apps.
Use Tap & pay
1. Make sure NFC is on and that the terminal has this symbol:
2. Unlock your phone and touch its back to the terminal.
Your payment app might require you to open the app and enter a PIN before touching your
phone to the terminal.
Disable Tap & pay
To disable Tap & pay, turn off NFC.
When NFC is off, Tap & pay is not included in Settings .
Connected devices
145
To Next Page
Loading...
