74
- Calling Features
Putting a Call On Hold or Mute
Using Call Waiting
When you are on a call, an alert tone sounds to indicate
that you have received a second call.
If necessary, you must turn on call waiting to use the feature. To turn
call waiting on or off:
Press To
M
>
Hold
or
M
>
Mute
put all active calls on hold
mute all active calls
Press To
1
N
answer the new call
2
SWITCH
(
+
)
or
LINK
(
-
)
or
M
>
EndCallOnHold
switch between calls
connect the 2 calls
end the call on hold
Find the Feature
M
>
Settings
>
In-Call Setup
>
Call Waiting
Calling Features -
75
Using Caller ID (Incoming Calls)
Calling line identification (caller ID) displays the phone
number for incoming calls in your phone’s external and
internal displays.
The phone displays the caller’s name (and picture ID, if
available) when the name is stored in your phonebook, or
Incoming Call
when caller ID information is not available.
You can also set your phone to play a distinctive ringer ID for
specific entries stored in your phonebook. For more information, see
page 83.
Calling an Emergency Number
Your service provider programs one or more emergency phone
numbers, such as 999, that you can call under any circumstances,
even when your phone is locked or the SIM card is not inserted.
Note:
Emergency numbers vary by country. Your phone’s
preprogrammed emergency number(s) may not work in all locations,
and sometimes an emergency call cannot be placed due to network,
environmental, or interference issues.
Dialling International Numbers
If your phone service includes international dialling, press
and hold
0
to insert the local international access
code (
+
) for the country from which you are calling.
(Inserting
+
enables your phone to make an international
call.) Then press the keypad keys as usual to dial the country code
and phone number.
Press To
1
keypad keys dial the emergency number
2
N
call the emergency number
76
- Calling Features
Calling With 1-Touch Dial
To call phonebook entries 1 to 9, press and hold the single-digit
speed dial number for one second.
You can set 1-touch dial to call the entries in your phone memory
phonebook or the SIM card phonebook:
Using Voicemail
Voicemail messages that you receive are stored on the
network. To listen to your messages, you must call your
voicemail phone number.
Note:
Your service provider may include additional
information about using this feature.
Listening to Voicemail Messages
The phone calls your voicemail phone number. If no voicemail
number is stored, your phone prompts you to store a number.
Find the Feature
M
>
Settings
>
Initial Setup
>
1-Touch Dial
Press To
1
S
scroll to the location you want
2
SELECT
(
+
) select the location
Find the Feature
E
>
Voicemail
Calling Features -
77
Receiving a Voicemail Message
When you receive a voicemail message, your phone displays the
voicemail message indicator
t
and the
New Voicemail
notification.
The phone calls your voicemail phone number. If no voicemail
number is stored, your phone prompts you to store a number.
Storing Your Voicemail Number
If necessary, use the following procedure to store your voicemail
phone number on your phone. Usually, your service provider has
already done this for you.
Note:
You cannot store a
p
(pause),
w
(wait), or
n
(number)
character in this number. If you want to store a voicemail number
with these characters, create a phonebook entry for it. Then, you
can use the entry to call your voicemail.
Press To
CALL
(
+
) listen to the message
Find the Feature
EM
>
Voicemail Setup
Press To
1
keypad keys enter your voicemail number
2
OK
(
+
) store the number
To Next Page
Loading...
