INSTALLATION MTM5400 Mobile Terminal Installation Manual 31
Terminal Installation
Enhanced Control Head Installation
The Enhanced Control Head can be removed from the housing and turned to any position within a
180° radius. This provides multiple mounting options for the terminal. For example, the terminal may
be mounted on either side of the vehicle to facilitate the safest and most ergonomically ideal
position. The Enhanced Control Head may then be turned to provide the most convenient access.
To reposition the Enhanced Control Head:
1. Insert the dismantling tool (Motorola P/N 6686119B01) in the groove between the Enhanced
Control Head and the terminal assembly as shown in the figure below.
2. Press on the dismantling tool until the snap connectors on the side of the Enhanced Control
Head release from the terminal assembly.
3. Pull the Enhanced Control Head away from the terminal assembly.
Figure 3 Typical Control Head Removal
To Next Page
Loading...
