Motorola MTP700 - Replacement Parts; Replacement Parts and Kits; Servicing MTP700 Portable Units

REPLACEMENT PARTS AND KITS MTP700 Portable Radio / Detailed Service Manual A - 1
APPENDIX A
REPLACEMENT PARTS AND KITS
Servicing MTP700 Portable Units
Service for the portable units is based on the substitution method; a faulty part is
replaced by a working one, providing quicker service to the customer. For example, if the
transceiver board is faulty, it is replaced. If the portable requires more complete testing or
servicing than that is available at field level, it is sent to your nearest Radio Service
Center; where it is serviced.
The MTP700 portables are programmed at the factory. They cannot be tuned at the field
service level.
Level 1 and Level 2 Maintenance
This manual covers Level 1 and Level 2 Maintenance: at Level 1 Maintenance you
replace the transceiver and/or accessories and send the faulty transceiver and/or acces-
sories to a higher level of maintenance; at Level 2 Maintenance a faulty kit is replaced.
For Latin America Level 1 and Level 2 Maintenance contact your local Motorola CGISS
office for information. For details, please refer to relevant Support Depots on page 1-4 to
1-6.
Level 3 Maintenance
All Radio Support Depots outside of Latin America are level 3 service partners. The
depots are capable of performing repairs down to component level where retuning is
required. Contact your local CGISS office for information. For details, please refer to rele-
vant Support Depots on page 1-4 to 1-6.
Replacement Parts
Damaged parts should be replaced with identical replacement parts. For complete infor-
mation on ordering required parts and kits, contact your local customer service represent-
ative.