SELF CHECK (ERROR & FAIL CODES) MTP700 Portable Radio / Detailed Service Manual D - 1
APPENDIX D
SELF CHECK (ERROR & FAIL CODES)
General
This appendix describes the possible self check error codes for the MTP700 Portable 
Radios.
Self Check Error Codes
Table D-1 is the possible self check error (non fatal) codes for the MTP700 Portable 
Radios. No corrective action is required.
Table D-2 is the possible self check fail (fatal) codes for the MTP700 Portable Radios. 
The radio is inoperatable, the user should return the radio to Depot.
Message Cause
Error00001 A non-fatal error was logged during operation
Error00002 CodePlug error log validity error
Table D-1 Self Check Error (Non-Fatal) Codes
Message Cause
Fail00100 Old CodePlug Version failure
Fail00200 New CodePlug Version failure
Fail00400 CodePlug Model failure
Fail00800 CodePlug validity error
Fail00801 CP - Unknown block
Fail00802 CP - Unknown Field
Fail00803 CP - Unknown Flag
Fail00804 CP - Unknown format
Fail00805 CP - Invalid pointer
Fail00806 CP - Invalid path
Table D-2 Self Check Fail (Fatal) Codes