TRANSCEIVER 400 MHz MTP700 Portable Radio / Detailed Service Manual 4.1 - 61
Did the unit pass the
initialize DSP test?
Initialize the DSP. Use the
Digital Diagnostic SW.
Yes
No
No
Yes
Did the unit pass the
Load Setfiles test?
Did the unit pass
the flash test?
Did the unit pass the
512kx16 SRAM test?
Check for defective SRAM
(U302) or REDCAP2 (U301).
The Flash (U303) or the
REDCAP2 (U301) are defective.
No
Yes
Yes
Check for defective
REDCAP2 (U301).
No
Check for defective
REDCAP2 (U301).
Test the external SRAM (U302).
Load Setfiles to configure
the chip selects.
Test the Flash
U303
.
B
A
To Next Page
Loading...
