18
English
RADIO OVERVIEW
• When editing existing information,
pressing 1 will ALWAYS start the
character cycle at the blank space and
NOT at 1.
Menu Keys
Selecting a Feature
A unique feature of your radio is its use of the
display to give you quick access to many of the
radio’s features without having to have a
dedicated key for each feature.
The names of the features (CALL, MUTE, etc.)
are shown on the display, three at a time.
Selection of features is controlled by the three
keys directly below the feature names: the left
key controls the left feature, the middle key
controls the middle feature, and the right key
controls the right feature.
Softkeys (l;l)
When already in Menu Mode, these keys are
used to make Menu selections.
Left and Right Arrow Keys (,/)
The left and right arrow keys are used to scroll
the display forward or backward through the
radio’s features and lists. There is no end point
to the list, so if you continue to scroll in one
direction, the display will “wrap around” back to
the beginning of the list. If you hold either key
down, the display will scroll at a faster rate until
the key is released.
Theleftarrowkeyisalsousedforeditingwhen
you are entering information manually from the
keypad.
Pressing the left arrow key, when editing
numeric information (such as telephone
numbers), will backspace, and erase the
display, one character at a time. If you have
erased all the digits, an additional press of the
left arrow key will return the display to the pre-
programmed list.
l;l
,./
Softkey
Softkey 3
Left Home Right
Softkey
To Next Page
Loading...
