38
English
GETTING STARTED
programmable period – the default is one
second – of each other) the radio.
Note: If you try to transmit (press the PTT
button) on a smart PTT mode that is
busy, a continuous alert tone is
generated until the PTT button is
released; the transmission is inhibited.
• The red LED blinks when the radio is
receiving indicating that the mode is
busy.
MUTING THE KEYPAD TONES
The radio’s keypad tones, normally heard each
time a keypad key is pressed, can be turned
off (muted) or on (unmuted) at your discretion.
To use the keypad mute feature:
Note: Pressing . or the PTT button will
exit this menu without changing the
mute selection.
1 / until MUTE is
displayed.
ZONE MUTE CALL
2 ; (the softkey
below
MUTE).
You will see the
current mute state
momentarily
—or—
Then
3 Press the softkey
below the desired
mute state (on or
off). The radio
returns to the home
display.
TONES ON
TONES OFF
ON OFF
PLANT
PLANT POLICE
To Next Page
Loading...
