Motorola MTX9250 - Scan Operations; Scan Operation; Turning Scan On or Off

55
English
SCAN
SCAN
SCAN OPERATION
Thescanfeatureallowsyoutomonitoractivity
on different conventional or trunked modes by
scanning a scan list of modes. This list can be
programmed by your auathorized Motorola
dealer and is user programmable.
The table below lists the types of scan
operations available.
Automatic scanning (autoscan) can be
programmed by your authorized Motorola
dealer. If autoscan is enabled for a mode, your
radio begins scanning, using the mode’s scan
list, whenever you select that mode. The radio
will continue autoscanning until you select a
mode that does not have autoscan enabled.
Turning Scan On or Off with the Keypad
Note:
is used to indicate the radio’s
home display.
Conventional Comprises conventional-only
modes.
Tal kgroup
Scan
Comprises conventional modes
and trunked modes from more
than one trunking system.
PLANT POLICE
1 / until SCAN is
displayed.
2 ; (the softkey
below
SCAN).
Youwillseethecurrent
scan state momen-
tarily.
or
Then
3 Press the softkey
below the desired
scan state (on or
off). The radio
returns to the home
display.
PHON SCAN CALL
SCAN ON
SCAN OFF
ON OFF
PLANT POLICE