41
English
RADIO CALLS
(TRUNKED
OPERATION ONLY)
Sending a Private Conversation Call
There are four steps in sending a Private
Conversation Call:
1. Initiating a Private Conversation Call
2. Entering the Desired Radio ID Number
If the last ID number called is the desired
number, go directly to step 5.
To enter a new number
Note: Exactly six digits must be entered for
the radio ID number. If fewer than six
digits were entered, you will hear a
bad-keypress tone, and the display
will show INVALID ENTRY when
attempting to send the radio ID num-
ber. A bad-keypress tone will also be
heard if you try to enter a seventh digit.
Once you have started entering numbers, the
, key functions as a backspace key.
Pressing it causes the last digit entered to be
erased, and the cursor moves to the left. When
the last digit is erased, an additional press of
this key causes the last member of the
preprogrammed call list to be displayed.
Pressing / shows the first member of the
list.
To enter a number from the call list
1 / until CALL is dis-
played.
2 l (the softkey below CALL).
3 The display shows the
last ID number transmit-
ted or received.
4a Enter the new six-digit ID number using the
keypad.
4b On the display, the old ID number disappears
and the new digits appear as they are being
entered.
4c The cursor flashes indicating the location of
the next number to be entered
ZONE MUTE CALL
ID: 722588
4a , or / to enter the call list.
4b / takes you to the first or next member of
the list; , takes you backwards to the last
or previous member of the list.
To Next Page
Loading...
