Administrator’s Handbook
128
CONFIG Commands
“Remote ATA Configuration Commands” on
page 148
“PPPoE with IPoE Settings” on page 190
“DSL Commands” on page 150 “Ethernet Port Settings” on page 191
“Bridging Settings” on page 151 “802.3ah Ethernet OAM Settings” on
page 192
“DHCP Settings” on page 153 “Command Line Interface Preference Set-
tings” on page 193
“DMT Settings” on page 159 “Port Renumbering Settings” on page 194
“Domain Name System Settings” on page 160 “Security Settings” on page 195
“IGMP Settings” on page 162 “System Settings” on page 210
“IP Settings” on page 164 “Syslog” on page 214
“Queue Configuration” on page 177 “Wireless Settings (supported models)” on
page 216
“IPMaps Settings” on page 184 “VLAN Settings” on page 224
“Network Address Translation (NAT) Default Set-
tings” on page 185
“VoIP settings (supported models)” on
page 229
“Network Address Translation (NAT) Pinhole Set-
tings” on page 186
“UPnP settings” on page 235
“PPPoE /PPPoA Settings” on page 187 “DSL Forum settings” on page 235
“SNMP Settings” on page 209 “Backup IP Gateway Settings” on page 238
To Next Page
Loading...
