Motorola PMMN4095 - Disconnecting the Mobile MIC Gateway from Mobile Radio; Coiled Cord Replacement

MOBILE MIC BLUETOOTH® GATEWAY
English
22
Disconnecting the Mobile Mic Gateway from
Mobile Radio
To disconnect the Mobile Mic Gateway from your mobile radio, follow
the steps below:
Procedure:
1 Turn the locking collar of the Mobile Mic Gateway in a quarter turn
counterclockwise.
2 Pull the cable from the accessory interface connector to release.
Coiled Cord Replacement
To remove the PMMN4097 coiled cord, follow the steps below:
Procedure:
1 Rotate the locking collar at the base of the Mobile Mic Gateway in a
counterclockwise direction until it stops.
2 Pull the cord out and away from the base of the Mobile Mic
Gateway.
3 Install a coiled cord in the reverse order of removal.