36
English
Calibration Menu
Figure 8: Calibration Menu
The Calibration setup selections enables or disables the Discharge
phase of Calibration/Reconditioning. The Discharge phase precedes
the full charge required for successful Calibration/Reconditioning. This
feature is useful when the charger is deployed to a location requiring
the battery to be at a charged state of readiness as quickly as possible.
In these situations, waiting a few extra hours for full battery discharge
may be inconvenient.
If an IMPRES 2 or IMPRES battery is due for Calibration, this battery is
discharged when inserted into the charger, and the charger has
Calibration disabled, the charger will take advantage of this situation.
Completion of battery charge will automatically complete IMPRES
battery Calibration.
MN003555A01.book Page 36 Wednesday, February 14, 2018 2:40 PM
To Next Page
Loading...
