55
English
Figure 28: Securing AS000111A01 Charging Pockets to
Multi-Unit Charger Base
1. Plug in the USB connector and harness connector to the
receptacles on the base.
Note: USB or harness connector may not be available on some of the
Charger Pocket. Plug in the available connectors to the base.
2. Slot in the Charging Pocket to the base and ensure the Charging
Pocket is flushed into the Multi-Unit Charger. Affix the Charging
Pocket screw.
USB Receptacle
Harness Receptacle
AS000111A01AS000111A01
MN003555A01.book Page 55 Wednesday, February 14, 2018 2:40 PM
To Next Page
Loading...
