Motorola RAZR2 V9m - Install the Battery; Battery Charging

12
essentials
install the battery
battery charging
New batteries are not
fully charged.
Plug the battery
charger into your
phone and an
electrical outlet.
1 Remove the battery
door by pressing
slightly and pushing
it toward the top of
the phone.
2 Lift the battery door
off.
Note: Before you insert
the battery, lift the white
plastic tab so you can
remove the battery later.
3 Insert the battery by
aligning the metal
contacts first and
then gently
pressing it into
place.
4 Replace the battery
door by aligning the
small hooks and
then sliding the
door into place.