Motorola RFS6000 Configuration Guide

Configuration Guide
PN: 1725-36197-001_A.doc
10
When SpectraLink Wireless Telephones are configured for
802.11a mode:
RFS6000>en
RFS6000#conf t
RFS6000 (config)#wireless
RFS6000 (config-wireless)#country-code us
RFS6000 (config-wireless)#radio add 2 00-A0-F8-CD-ED-EC
11a ap300
RFS6000 (config-wireless)#radio 2 beacon-interval 100
RFS6000 (config-wireless)#radio 2 dtim-period 3
RFS6000 (config-wireless)#radio 2 bss 1 1
RFS6000 (config-wireless)#radio 2 speed basic6 9 basic12
18 basic24 36 48 54
Channel selection
You can specify the desired channel manually by using the following
commands.
For 802.11b/g radio:
RFS6000(config-wireless)#radio 1 channel-power indoor 11
20
For 802.11a radio:
RFS6000(config-wireless)#radio 2 channel-power indoor 36
17
For configuring power and data rate settings, please consult your
facility’s RF site survey, designed for voice traffic, to determine if you
have sufficient coverage to support all data rates. SpectraLink
Wireless Telephones require the following minimum dBm reading to
support the corresponding
Basic data rate setting in the access point.
802.11
Radio Standard
Minimum Available
Signal Strength (RSSI)
Maximum
“Basic” Data Rate
-70 dBm 1 Mb/s
802.11b
-60 dBm 11 Mb/s
-63 dBm 6 Mb/s
802.11g
-47 dBm 54 Mb/s
-60 dBm 6 Mb/s
802.11a
-45 dBm 54 Mb/s
For additional details on RF deployment please see the Deploying
Enterprise-Grade Wi-Fi Telephony white paper and the Best
Practices Guide for Deploying SpectraLink 8020/8030 Wireless
Telephones.

Motorola RFS6000 Specifications

General

Brand	Motorola
Model	RFS6000
Category	Network Router
Language	English