Motorola S3 Series User Manual

28
Clock & Alarm
6. Clock & Alarm
If you subscribe to your network’s Caller ID service, the time on your S3000
may be set automatically each time you receive a call, depending on your
network provider.
You can also set or adjust the time using the Clock & Alarm menu.
6.1 Set date and time
1. Press and scroll to CLOCK/ALARM . Press . Display shows DATE & TIME ,
then press
.
2. Enter the date using the format
DD/MM e.g. 04/ 08 for 4th August.
3. Press
and enter the time using the 24 hour format HH:MM , e.g. 14:45
for 2:45pm.
4. Press
to conrm.
5. Press
to return to standby.
6.2 Set alarm
1. Press , scroll to CLOCK/ALARM and press .
2. Scroll
to SET ALARM and press .
3. Scroll
or to OFF , ON ONCE or ON DAILY and press .
4. If you select
ON ONCE or ON DAILY , enter the time using the 24 hour format HH -
MM
e.g 14:45 for 2:45pm and press .
5. Press
to return to standby. When the alarm goes off, press any key to
stop the ring.
NOTE
Once the alarm is set to on, the
icon is displayed.
The alarm will ring at the medium level.
ALARM ON and the will ash on the
display.
6.3 Set alarm melody
There are 3 alarm melodies.
1. Press
and scroll to CLOCK/ALARM .
2. Press
.
3. Scroll
to ALARM TONE and press .
Melodies are played.
4. Scroll
or to select a melody.
5. Press
to conrm.
6. Press
to return to standby.

Motorola S3 Series Specifications

General

Brand	Motorola
Model	S3 Series
Category	Cordless Telephone
Language	English