Motorola S3 Series User Manual

33
Advanced settings
8. Advanced settings
8.1 Recall time
This setting is useful to access certain network and PABX/switchboard
services.
The default S3000 recall time is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press
, scroll to ADVANCED SET and press .
2.
RECALL TIME is displayed. Press .
3. Press
or to select the setting you want: SHORT , MEDIUM , LONG .
4. Press
to conrm.
5. Press
to return to standby.
NOTE
The use of your S3000 cannot be guaranteed on all PABX.
8.2 Dial mode
The default S3000 dialling mode is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press
, scroll to ADVANCED SET and press .
2. Scroll
to DIAL MODE . Press .
3. Press
or to select TONE or PULSE .
4. Press
to conrm.
5. Press
to return to standby.
8.2.1 Temporarily switch from Pulse to Tone dialling
1. In talk mode press and hold for 2 seconds.
The dial mode will change from Pulse to Tone for the duration of the call.
8.3 Call barring
Prevent certain numbers from being dialled from your S3000. Store up to
four specic numbers, each up to 4 digits – for example, international or
local prexes.
Bypass Call barring by switching the setting to
OFF .
NOTE
If you switch Call barring on,
BARR MODE ON will be displayed on your screen in
standby mode.

Motorola S3 Series Specifications

General

Brand	Motorola
Model	S3 Series
Category	Cordless Telephone
Language	English