Motorola S3 Series User Manual

38
Advanced settings
8.12 Auto prex
You can set the S3000 to detect a dialling number and replace it with another
number. The number to be detected can be up to 5 digits long. It can be
replaced with a number up to 10 digits.
1. Press
, scroll to ADVANCED SET and press .
2. Scroll
to PREFIX . Press .
3.
DETECT DIGIT is displayed. Press .
4. Enter the number you want to be detected and press
.
5. Scroll to
PREFIX NUM . and press .
6. Enter the number you want it replaced with and press
.
7. Press
to return to standby.
8.13 Intrusion
When an external call is taking place, another handset registered to the base
can join in, making the call a 3-way conference, just by pressing
.
To enable this, Intrusion must be set to
ON .
1. Press
, scroll to ADVANCED SET and press .
2. Scroll
to INTRUSION . Press .
3. Scroll
or to ON or OFF .
4. Press
to conrm.
5. Press
to return to standby.
8.14 ECO mode
Your S3000 offers an ECO mode function which reduces the transmitted
power and energy consumption when switched on. This feature is set to
OFF
by default.
To turn ECO mode to
ON or OFF :
1. Press
, scroll to ADVANCED SET and press .
2. Scroll
to ECO MODE and press .
3. Press
or to highlight ON or OFF then press to conrm.
4. Press
to return to standby.
A conrmation beep is emitted and when switched ON the handset display
will switch between the handset’s name and
ECO MODE .
NOTE
When ECO Mode is set to
ON , the handset range will be reduced.

Motorola S3 Series Specifications

General

Brand	Motorola
Model	S3 Series
Category	Cordless Telephone
Language	English