10
11
• Tap NEXT STEP.
• Select CREATE ACCOUNT.
• Enter a user name, a password, an e-mail address and
select SIGN UP.
• Agree with the terms of use and select I AGREE.
•
T
ap NEXT STEP.
• Follow the on screen checklist to ensure that your camera
is power connected and tap NEXT.
• Select the camera from the list.
If you cannot nd the camera ID on the list, please reset the
camera with the following procedure:
1.
Switch the ON/OFF switch to ON.
2.
Press and hold the RESET
button on the underside of
the camera for 5 seconds, until you hear a beep sound.
3.
Release the RESET
button and wait for the camera to
complete the internal reset procedure.
4.
After about 60 seconds you will hear two short beeps and
the green LED will start blinking.
•
Wait for up to ve minutes. If the connection process takes
longer, tap CANCEL and try again.
•
Ensure that you have a good Wi-Fi network connection.
Getting started: Working with devices for Android
™
10
Getting started: Working with devices for Android
™
11
ENGLISH
P130082_Scout1_UG_US_EN_V5_2013_08_19.indd 10-11 19/08/2013 3:41 PM
To Next Page
Loading...
