Using Your Phone
30
Incoming Call Waiting
If another call comes in while you are on the phone, you can:
•Press
0
and
N
to reject the waiting call.
•Press
1
and
N
to end the active call and connect the waiting call.
•Press
2
and
N
to hold the active call and connect to the waiting call.
* Network and subscription dependent.
Holding a Call
When you are on a phone call and wish to dial another number, you can
place the current call on hold by pressing
-
(
OPTION
) or
N
. After a call
is put on hold,
r
1
will appear on the screen, and when the second call is
connected,
s
1
will pop up.
When you have an active call and a call that is on hold, you can press
N
to
switch calls.
When an active call ends, the call on hold will resume. You can also make a
call on hold active again by pressing
N
if you have only a held call.
Note:
This hold-call feature is network and subscription dependent.
Note:
The figure next to
r
/
s
(in the example above it is “1”) indicates
the number of held/active calls.
CompleteVersion.book Page 30 Friday, October 26, 2001 4:45 PM
To Next Page
Loading...
