Menus
75
Restore (4-9)
Reset all settings to default. Enter the phone code (the default phone code
is 1234) and press
-
(
OK
) or
N
twice to confirm.
E
Network (5)
When turning on your mobile phone, the phone automatically connects to
the designated network operator. This menu allows you to select an
appropriate network operator and system as needed.*
* Network and subscription dependent.
Automatic (5-1)
The phone will perform another network operator search after this function
is selected.
Manual (5-2)
The phone lists the available network operators for you to choose from.
Band (5-3)
Choose the frequency band for the GSM radio standard as needed. If you
select
A
utomatic,
your phone will detect the network environment and
select an appropriate network system automatically. You can also connect
your phone to a GSM 900 or GSM 1800 network by choosing
900 MHz
or
1800 MHz
.
CompleteVersion.book Page 75 Friday, October 26, 2001 4:45 PM
To Next Page
Loading...
