142
Data and Fax Calls
Receiving a Data or Fax Call
Use this procedure to transfer data or a fax to your
computer or hand-held device. Connect your phone to the
device as described on pages 139-141.
Set Up Your Phone
Do This To
1 Check the phone make sure that the phone is
connected and powered on
2 Open the
application on
your computer
place the call through the
application (such as
dial-up-networking or fax)
Note: You cannot dial data or
fax numbers through your
phone’s keypad. You must
dial them through your
computer.
3 End the call from
the connected
device
close the call and connection
when the transfer is complete
Find the Feature
M
>
Settings
>
Connection
>
Incoming Call
Do This To
1 Press
CHANGE
(
+
) select
Next Call
2 Press
S
scroll to
Data In Only
or
Fax In Only
To Next Page
Loading...
