8
Placing a Call Using Hands Free Operation
Hands Free operation allows you to use the phone while it is docked in the cradle. The phone audio is projected through
your vehicle’s audio system speakers. The Hands Free microphone allows both driver and passenger to engage in the con-
versation.
Step
11
11
Prepare the phone for Hands Free use:
• Dock the phone. (See “Switching into Vehicular Mode” on page 5.)
• Ensure the flip is closed.
22
22
Dial the telephone number via the radio keypad or via voice command.
*
NN
NN
oo
oo
tt
tt
ee
ee
::
::
You can enter up to 32 digits.
* Not available on all models.
33
33
Press Send on the radio keypad or steering wheel, or speak the voice command: “Dial.”
*
If the network is busy, you hear a fast busy signal. Your phone automatically redials over the next four minutes. When the call
goes through, your phone rings one time and connects the call.
44
44
Begin your conversation.
55
55
To end the call, press the End key on the radio keypad, steering wheel, or voice activation stalk.
*
To Next Page
Loading...
