157
Data and Fax Calls
Attaching a USB Cable
Install the Software
Install the software from the CD-ROM that comes with your
Motorola Original data kit. See the data kit’s user guide for more
information.
Sending a Data or Fax Call
You can connect your phone to a computer or hand-held device
to send data or a fax from the connected device.
Use this feature to transfer data from your computer onto
another device, and to synchronize phonebook and datebook
information between your phone, computer, and/or hand-held
device.
Connect your phone (see “Connecting Your Phone to an External
Device” on page 156) and do the following:
Do This
1
Plug the end of the cable with the Motorola logo into your
phone’s accessory connector port. Make sure that the logo
and the phone are both facing you.
2
Plug the other end—the USB connection—into the USB
port on the external device.
Do This To
1
Check the phone make sure that the phone is
connected and powered on
To Next Page
Loading...
