Installation and Overview
VAP2400 Wireless Video Bridge • Installation Manual 9
Installing Your VAP2400 (Dual Units)
Follow the instructions below to install your Access Point and Client.
Step 1: Install the Access Point
1. Connect one VAP unit to your Home Gateway using the provided Ethernet cable. Before you connect the
VAP, ensure the Gateway is powered on.
2. Connect the power adapter to the VAP and plug the adapter into a wall outlet. You’ll see the power LED
on the unit’s front panel light green, indicating the unit is powered:
. Check to ensure the operational
mode LED lights green, indicating the VAP is functioning as an Access Point.
or
To Next Page
Loading...
Need help?
General
