Installation and Overview
VAP2400 Wireless Video Bridge • Installation Manual 12
Installing Additional VAP2400 Clients
Once you’ve installed your Access Point to your home gateway and established a wireless connection with your
Client, you can install additional VAP clients throughout your home. Follow the instructions below for each single
client unit you wish to install.
1. Connect the VAP to your secondary set-top box with the provided Ethernet cable. Before you connect the
VAP, ensure your set-top box is powered on.
Note: While you are required to connect your VAP to a set-top box to ensure it properly transfers video
throughout your home, the VAP’s extra Ethernet ports provide you with the option of connecting other
devices to the unit as well, such as computers and gaming consoles.
2. Connect the power adapter to the VAP and plug the adapter into a wall outlet. You’ll see the power LED on
the unit’s front panel light green, indicating the unit is powered:
.
or
To Next Page
Loading...
Need help?
General
