Need help?Do you have a question about the Motorola Starline SG 2000 and is the answer not in the manual?
General| Brand | Motorola |
|---|---|
| Model | Starline SG 2000 |
| Category | Network Hardware |
| Language | English |
Guidance on how to use the manual and what information is provided in each section.
List of documents that may provide additional relevant information.
Explanation of stylistic conventions used in the manual for clarity.
Contact information and operating hours for technical support.
Procedure for obtaining a Return for Service Authorization (RSA) number and shipping units.
Details on the SG 2000 housing, mounting holes, port locations, and gaskets.
Description of the SG2-PS2 power supply, its features, and surge protection.
Information on the optional LIFELINE Status Monitoring System (LL-SG2).
Overview of the SG 2000's configurable features and optional hardware.
Guidance on using gain option selection charts for optimal performance.
Instructions for determining preferred tilt using charts based on bandwidth and channel load.
Procedures for powering the node, setting up power supplies, and DC powering checks.
Procedures for quick checks, manual gain control, and ADU/TCU setup.
Setting up analog/digital return paths and forward path padding.
Using charts to analyze launch amplifier output stage and link performance.
Instructions for installing the DS-SG2-DRRB and Status Monitor options.
A worksheet to log pertinent setup information for the SG 2000 node.
Procedure for splicing the six-fiber service cable to the transportation fiber.
Instructions for mounting the housing to the strand wire using bracket assemblies.
Steps for installing coaxial cables into the base of the SG 2000 housing.
Procedure for routing and connecting fiber cables into the lid of the SG 2000.
Configuration options for the SG2-lid motherboard (Single, Redundant, Broadband/Narrowcast).
Setup procedures for analog and digital return paths, including redundancy.
Information on installing, removing, and cleaning SG 2000 optical modules.
Details on the SG2-LR forward path optical receiver and its features.
Overview of various SG 2000 optical transmitters like SG2-IFPT, SG2-FPT, and others.
Details on SG2-PS power supply, status monitoring, manual control, and ingress control.
Optical and general characteristics of the SG 2000 node.
RF characteristics for the SG 2000 node, including passbands and splits.
RF performance specifications for various SG 2000 optical modules and transmitters.
Current requirements for various SG 2000 options and platforms.
Torque specifications for fasteners used in the SG 2000 node.
Alphabetical list of abbreviations and acronyms used in the manual.
To Next Page
